Holmes Hobbies LLC

Home Motors Discontinued motors Cobalt Puller 454

Cobalt Puller 454

**For Cliff Climber use the stock Berg pinions (mod 0.6). Stock Cliff Climber motors use 2.3mm bore mod 0.6 pinions**

With the Holmes Hobbies Adapter plate (No longer included!) you can bolt this up to a standard 540 mount. Considered a "400" sized motor. The 11t is recommended for 7.4v lipo use (or similar nimh) only, the 16t version can be used with 11.1v batteries (3s lipo or 10 cell nimh).

1/8" (3.17mm) shaft diameter
16mm bolt spacing, 2.5m screws
5 slot armature
Cobalt magnets
Speed 300/400 replacement
50mm long face to end, 28mm diameter

11 turn- 3300 KV
13 turn- 2800 KV
14 turn- 2700 KV
16 turn- 2500 KV

Motors will run hot just like the stock Cliff Climber/ rs10 motors, so be careful!

We use these in our comp 2.2 Berg with great success on 7.4v lipo. They do pack enough punch for 2.2 use, but care must be taken to be sure that the motors do not overheat.

Details

SKU HH CP 454-141

Weight 0.50 lbs

Our price: $44.99